> For the complete documentation index, see [llms.txt](https://cookbook.denovolab.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://cookbook.denovolab.com/quick-setup-for-termination-traffic/create-termination-route/static-route.md).

# Static Route

#### Introduction

Static Route is how you define actually how vendor trunk is to be selected.  Within Static Route, you can order the vendor trunks by:

* Top Down Routing
* Round Robin Routing
* Percentage Routing

Top Down Routing means Class 4 will always select the route from top to bottom of the vendor trunk list.  Round Robin means Class 4 will balance traffic sent all vendor trunk evenly.  Percentage routing let's you define % of traffic being sent to each vendor trunk. 

Here is how you create static routing:

#### Step 1: Click on Routing > Static Routing

![](/files/-MYcgfHpqMxJex1PZK_y)

#### Step 2: View all existing static routing

![](/files/-MYcglanaoYhIRCmPxds)

#### Step 3: Add new static routing

You can click on "Create New" and then create a new static routing:

If you are terminating US traffic, you should route by LRN number instead.  For A-Z traffic, pls select DNIS.

![](/files/-MYcj2_rgo6uN7JK6Kh-)

#### Step 4: Add new static routing entry

![](/files/-MYcitwNMN6foiUluQ60)

When you click inside the name of the static route, you get to see the list of routing entry:

You can have different set of vendor trunks defined for different DNIS routing code.  You can have different routing strategy for different DNIS prefix or you can leave it blank.