Master DNL Class4
  • Introduction
  • Configure a new Class 4 instance
    • Setup Admin Access
    • First Time Login
    • Setup SIP Switch
  • Your First Call with Class 4 Fusion
    • Create Vendor Rate Table
    • Create Termination Vendor
    • Create Egress Trunk
    • Create Dynamic Route
    • Create Routing Plan
    • Create Client Rate Table
    • Create Termination Client
    • Create Ingress Trunk
    • Simulate Your Call
  • Support Contact
  • eLearning
  • Bug Reporting Process
  • Hardware Sizing
  • Licensing
  • Installation
    • Install with Tarball
    • Install with RPM
      • Step by Step Guide
    • Install with AWS
    • Install with Google Cloud
    • Distributed Architecture
      • Switch Server
        • dnl_live_monitor
        • dnl_tool
        • dnl_livecall
        • dnl_softswitch
        • dnl_watchdog
        • dnl_cloud
      • Web UI
        • dnl_web_helper
    • Troubleshoot Your Installation
    • Setup SSL on Web UI
    • LAN IP Setup for Virtual Machine
    • Change IP/MAC Address
    • Validate Your Installation
      • Check dnl_softswitch log
    • Configuring DNL softswitch
    • Setup Selinux
  • Configuring Stir/Shaken
    • Generating Certificate with Peeringhub.io
  • Upgrade an Existing Installation
    • Update an Existing Installation
      • Update with Tarball
      • Update with RPM
  • Stir Shaken
    • Introduction
    • Configure Class 4
    • Configure Stir Shaken in DB
    • Configure Ingress Trunk
    • Configuring Egress Trunk
    • Basic Configuration Example
    • Validation of Stir/Shaken Setup
    • Setup External AS/VS connectivity
  • Basic Switch Configuration
    • Integrate Class 4 to Google SMTP
    • Customize your logo
    • Customize Domain Name
    • Customize email template
    • Customize invoice template
    • Configuring Payment Gateway
      • Stripe Configuration
      • Paypal Configuration
    • Configuring CDR and PCAP Backup
      • Google Cloud Setup
    • Configuring SIP Registration
    • Configuring LRN
  • Quick Setup for Termination Traffic
    • Create Termination Vendor
      • Specify IP to send to egress
    • Create Termination Route
      • Routing Plan
      • Static Route
      • Dynamic Route
    • Create Termination Client
    • Test with Call Simuation
    • Test Calls with SIP Client
    • Check CDR
  • Quick Setup for Origination Traffic
    • Introduction
    • Create DID Vendors
    • Create DID Billing Plan
    • Create DID Clients
    • DID Repository
    • Assign DID to Client
    • Test Calls with Call Simulation
    • Setup for your client to buy DIDs from portal
  • Data Access
    • Postgres Database
      • Obtain Report Data from DB
      • Obtain CDR from DB
    • Raw Switch Data
      • CDR Data
        • Release Cause Definition
      • PCAP Data
      • Auto Data Cleanup
  • System Administration
    • Modules
    • Start and Stop
    • Logging
    • Software Updates
    • Setup additional dnl_softswitch
    • Add Additional IP to Switch
    • Configure SIP Cause Code and Q850 Mapping
    • Enable Media Proxy
  • Class 4 API
    • Authorization
    • Class4 API
  • Troubleshooting
    • Calls are failure
    • Change Q850 in 4xx/5xx
    • One-way Audio with SIP Client Testing
      • Using Zoiper to resolve NAT issue
  • Automatic Call Blocking
    • Introduction
    • Youmail Blocking
    • DNC Blocking
    • LERG Blocking
Powered by GitBook
On this page

Was this helpful?

  1. Your First Call with Class 4 Fusion

Create Dynamic Route

PreviousCreate Egress TrunkNextCreate Routing Plan

Last updated 4 years ago

Was this helpful?

Class 4 is a very flexible and powerful routing engine. There are many different ways for you to setup routing. In this quick guide, we will talk about the most basic way of setting up routing.

First you go to Routing > Dynamic Routing

You can see the list of dynamic routing above. Then, you can click on "Create New" to create a new dynamic routing. Here in the dynamic routing, you give it a name and you specify the list of egress trunks that you want to route traffic into within this dynamic routing.

After you submit, you can see the new dynamic routing created.